{{results.messages.text}}
Excellent Side Post Battery Still under free replacement warranty from walmart Cold weather is coming Don't get stranded with a bad battery This is a MAXX-78S Side Post Battery 650 Cold Cranking Amps 800 Cranking Amps Dimensions (L x W x H) 10.20 x 7.10 x 7.30 Inches Cost over $100 Asking $75 obo
{{results.messagesById['5bc0bfddf8716962b2e82b46']}}
This ad is for a set of used connecting rods for a 1984 - 1989 Porsche 911 Carrera and or Turbo with a 3.2 / 3.3 / 3.6 liter engine. The connecting rods are in very good shape. I have two sets of these connecting rods. The Porsche part number is 964.103.020.63 The Porsche foundry number cast on the rod is 930.103.121.2R The weight group of the connecting rods is 3 = 615 - 624 g. The rod code is...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=2219162']}}
Great shape. Set of 4
{{results.messagesById['https://www.varagesale.com/south-eastern-manitoba-buy-and-sell/i/jq8u74aa-dodge-wheel-covers-17']}}
This ad is for a used OEM vacuum tank out of a 1970 911T Sportomatic. It is in very good condition, especially when one considers the age and proximity to the environment. I am asking $150.00 for this item, plus $25.00 in UPS Ground freight charges, shipped anywhere in the U.S.A.
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=562308']}}
This ad is for four like new 205 / 50 / 15" Yokohama S Drive tires for a 1970 - 1976 Porsche 914 and or a 1970 - 1977 Porsche 911. The tires would also fit a Porsche 912 and any number of VW sedans and buses. The tires have less than 1,000 miles on them and retail from $90.00 - $100.00 each. The tires will be strapped two to a bundle and shipped via UPS or FedEx. The tires are located in Martin...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=2101605']}}
This ad is for three used factory 4 x 130 mm bolt pattern 4.5J x 15" slotted steel rim for a 1970 - 1973 Porsche 914-4. These rims are no longer available. They have been media blasted to remove the surface rust and the layers of old paint. An etching primer was applied followed by a nice powder coating. If you need a single rim I have one listed separately here on the Samba. It is painted howe...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=2115827']}}
This ad is for a set of used OEM exhaust valves for what is thought to be a 1970 - 1977 Porsche 911 T E S and or a 1970 - 1972 Porsche 914-6. The valves are 40 mm in diameter and look to be sodium filled with the dimple in the middle. I think they are used in a 2.2, 2.4 and 2.7 liter engines. The valves look to be in very good condition. I don't know the history of these valves. So I can't real...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=2007468']}}
This ad is for a new aftermarket right rear flare in fiberglass for a 1978 - 1983 Porsche 911 SC. The flare may fit a 1974 - 1978 911 Carrera too but I can't say for sure. It looks like a 11" flare from GT Racing but I am not sure. Please do your homework to insure it is correct for your needs. I am asking $50.00 for the part plus $25.50 in postage and paypal fees
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=2007763']}}
This ad is for a mostly complete OEM set of parts for the left and right chain case of a 1965 - 1989 Porsche 911. Not at all sure of this so please do your homework to insure the set of parts is correct for your needs. There was a note indicating a chamfered washer was missing. I am assuming that is the thrust washer. Part number 901.105.562.00. I wish I was more experienced but I think that is...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1922898']}}
This ad is for a left rear bumper guard for a 1979 - 1983 Porsche 911SC. The bumper guard is in good shape. Not perfect mind you but in good shape which isn't bad when one considers their age and proximity to the environment. Aside from some thorough cleaning and perhaps a shot of Back to Black the bumper guard is ready to be bolted to a bumper. Why buy new when you can have both for less than ...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1923488']}}
This ad is for a used OEM 8 position fuse block with cover for a 1974 - 1989 Porsche 911 and or a Porsche 930. The fuse block is in verr good condition aside from the broken corner. You may be able to repair. I am pricing it as parts. The Porsche part number is 911.612.087.01 I am asking $40.00 for the parts plus $8.50 in postage and paypal fees
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1931498']}}
This ad is for a set of new Mintex brake pads for the front calipers of a 1973 - 1976 Porsche 914-4. The brake pads may very well fit a 1972 - 1974 VW 412. They also may fit a early Porsche 911 or 912 so please do your homework to insure they are correct for your needs. The Porsche part number is 914.351.905.01 I am asking $30.00 for the set plus $7.50 in postage and paypal fees
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1746725']}}
This ad is for the left and right factory heating air supply sheet metal pieces with the hard to find lids for a 1970 - 1976 Porsche 914-4. From the looks of these one may be stainless steel but I doubt it. I think it may however be a new piece and just not as dirty as the other part. The Porsche part number for the left side is 022.256.501.A The Porsche part number for the left side lid is 021...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1749048']}}
This ad is for a stock Porsche Type IV 66mm crankshaft assembly without connecting rods for a 1970 - 1976 Porsche 914-4 with a 1.7 liter engine and or a 1.8 liter. The crankshaft will fit a VW as well so please do your homework to insure it is correct for your needs. I need to send the crankshaft to my crankshaft machine shop to have it cleaned, measured and repaired if necessary. As well as ma...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1832829']}}
This ad is for a used OEM ashtray housing for a 1974 - 1989 Porsche 911 / 930. In looking at the housing I think it will fit a 1965 - 1973 Porsche 911 and or a Porsche 912 but please do your homework to insure it is in fact correct for your needs. The housing does not include the bolt on front part that meets the left and right knee pads under the dash. The housing itself is in good shape and n...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1842728']}}
This ad is for a used pair of left and right aftermarket rear side panels in brown leather for a 1984 - 1986 Porsche 911 Carrera coupe. Although in looking at the panels I believe they would fit all "G" model cars but please do your homework to insure they are correct for your needs. These may need to be recovered. The leather isn't in the best of shape although a good cleaning and conditioning...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1843525']}}
This ad is for a used Manifold Pressure Control Sensor unit for the 1970-73 Porsche 914 Type IV 1.7 liter cars with D-Jetronic fuel injection system. The pressure sensor is the key component of the MPC (Manifold Pressure Control) D-Jetronic fuel injection system. Its function is to measure the amount of vacuum being drawn into the engine. Based on the amount of vacuum being drawn, it sends a el...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1451515']}}
This ad is for used ATE brake caliper for the left front of a 1970 - 1971 Porsche 911 and or a Porsche 914-6. I am not absolutely positive that is for only a Porsche 911 it could also be a left front brake caliper for a 1970 -1971 Porsche 914-4 as well. Please do your home work to ensure this is the correct caliper for your needs. The caliper looks to be complete and should be an excellent cand...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1467503']}}
This ad is for what I believe to be is a new Sachs clutch disc for a 1967 - 1979 VW Type 1 and also a 1969 - 1971 VW Type 2 and perhaps other models too. But please do your homework to insure this is the correct disc for your needs. There is a tag on the disc that reads 1864 215 305 as well as 022 141 031 B which is a VW part number. Someone wrote 356 C on the tag and at first I thought it was ...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1111174']}}
This ad is for a new OEM oil sump stainer screen gasket and a drain plug seal for a 1970 - 1976 Porsche 914-4 1.7/1.8/2.0. The kit has 2 sump gaskets and 1 drain plug seal and is made by S.A.B.O. Industries. This kit probably would work on any VW with a TIV engine, but please do your homework to insure that the parts are appropriate for your application. I have eight of these gasket kits. The P...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=1117508']}}
Post Ad